Emulsion Design Tool
Table of Contents
- Planning and Design of Emulsified Oil Injection Systems
- Overview
- Emulsified Oil Process
- Site Screening Requirements
- Injection System Design Process - Injection Only
- Injection System Layout
- Source Area Treatment Dimensions
- Barrier Dimensions
- Barrier Contact Time
- Base Treatment Volume (BTV)
- Mass and Volume Scaling Factors
- Determine Injection Fluid Volume
- Oil Retention (OR) by Sediment
- Maximum Oil Retention (ORM)
- Determine Oil Requirement
- Contact Efficiency Simulations
- Typical Simulation Results for Stochastic Permeability Distribution - ‘Medium Heterogeneity'
- Flow Contact Efficiency for Barriers
- Volume Contact Efficiency for Area Treatment (Row Spacing = Well Spacing)
- Volume Contact Efficiency for Area Treatment (Row Spacing = 2 * Well Spacing)
- How to Estimate Oil Reinjection Frequency
- Treatment Performance in Barriers as Substrate is Consumed
- Determine Injection Frequency for Barriers
- Design Tool Overview
- Design Tool Table of Contents
- Aquifer Description
- Contaminant / Biogeochemical Characterization
- Well Installation Method
- Barrier Design Information
- Capital Cost Analysis
- Life Cycle Cost Analysis
- Case Study Summary of Selected Design
- Additional Resources
Text and Images from Slide
Barrier Dimensions
- Barrier width (Y)
- Make barrier wider than plume width (usually 10% to 30% wider)
- Barrier length along <br />flow direction (X)
- Based on contact time
- Multiple rows if needed
- Vertical thickness (Z)
- Use effective vertical thickness when visibly different zones are present
